The iMux4A/iMux8A is an E1 inverse multiplexer capable of bundling up to 4E1/8E1 lines for cost-effective connection of 10/100Base- TX or 100Base- FX LANs over multiple E1 transports. The iMux4A/iMUX8A inverse multiplexer transmits up to a 9.92Mbps/15.87Mbps Ethernet bridge channel (GFP-F encapsulated) over 4E1/8E1 links. The iMux4A/iMUX8A bridges the gap between E1 and E3, allowing bridges to operate at faster rates. It also provides high speed access to SDH/SONET backbones where the only access services available are E1 lines. The iMux4A/iMux8A supports an E1 attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The iMux4A/iMUX8A fully meets E1 specifications including ITU-T G.703 and G.823.

The iMux4A/iMux8A features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the iMux4A/iMUX8A and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration.

The CWMD-180 is 18 channel Dual Fiber CWDM MUX/DEMUX, 1U Rack Mount design for CWDM wavelengths from 1271nm to 1611nm. When fiber availability is limited, the CWMD-180 CWDM Mux/Demux can increase the bandwidth on the existing fiber infrastructure. By using 18ch CWDM Mux Demux, up to 180 Gbps could be supported on a fiber pair.

The 18 channel MUX/DEMUX rack provides the primary wave division and combination functions for CWDM. Line side wave lengths require translation to client side equipment via a transponder card or direct connection to CWDM wavelength SFP modules.

SML40-CH04 is a 1U 19-inch CWDM passive rack that features 4 cards capacity and supports SML-40-8181-L, 8+1 channels MUX/DEMUX cards. The 8+1 channels MUX/DEMUX card is a modular design for CWDM wavelengths including 1471nm, 1491nm, 1511nm, 1531nm, 1551nm, 1571nm, 1591nm, and 1611nm. The 1311nm CWDM channel is accessible separately.

The MUX/DEMUX cards provide the primary wave division and combination functions for CWDM. Line side wave lengths require translation to client side equipment via a transponder card. The unique design makes the SML40-CH04 one of the compact CWDM solutions in the industry.

The SML-40-MD80 is an 8 channel MUX/DeMUX modular design card for CWDM wavelengths including 1471nm, 1491nm, 1511nm, 1531nm, 1551nm, 1571nm, 1591nm, 1611nm. The SML-40-MD81 is 8 channels MUX/DeMUX modular design card with monitor port. The SML-40-MD51 is a 5 channel MUX/DeMUX modular design card for CWDM wavelengths including 1491nm, 1511nm, 1571nm, 1591nm, 1611nm. The SML-40-MD40 is a dual 4 channels Mux/Demux card with wavelengths including 1471, 1491, 1551, 1531nm.

The MUX/DEMUX cards provide the primary wave division and combination functions for CWDM. Line side wave lengths require translation to client side equipment via a transponder card.

This device consists of 1 PoE Injector ports. That can solve the limitation of the power outlet location and offer the system designer a flexible solution to locate the network device everywhere. The compact size and wall mounting was specifically designed for easy installation. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.

The IFC-1000PSE/A is a copper to fiber Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-T to 1000Base-SX/LX with SFP LC connector. The IFC-1000PSE complies with IEEE802.3af Power Over Ethernet standard with external AC power adapter or internal AC power build-in. This PoE media converter is a Power Sourcing Equipment (PSE) which combines data received over a TP link with 48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT5 UTP cable. Other features include Link fault Pass-Through (LFPT), Store and Forward Switching, auto or forced mode setting for copper Ethernet as well as auto laser shutdown.

The IFC-100PD is Power over Ethernet 10/100Base-TX to 100Base-FX non-managed PD(Power Device) Fiber converter, which give you the options to choose from the most popular fiber cabling connectors, ST, SC, FC. Both multi-mode and single mode converter models are available as well as BiDi which allows bi-directional transmissions using only a single fiber cable. With Power over Ethernet (PoE) feature, IFC-100PD takes power supply over Ethernet cable from PoE Ethernet Switch and may work without external power adapter. The stand-alone converter may also be concentrated into either the FMC-CH08 or FMCCH17 non-managed chassis.

The GSW-2020P5 is a new generation CPE switch developed by CTC Union Technologies. This new CPE switch is designed with 4 ports 10/100/1000Base-T RJ45, plus 1 port 10/100/1000Bse-T RJ45 with PoE+/PSE for P2P FTTH service applications. Its design concept is well considered from the basis of stylish and elegant appearance for the residential user as well as the advantage of easy installation for the FTTH service provider.

The GSW-2020P5 fully supports Layer 2 feature sets with completely network management interfaces such as Web GUI, CLI and SNMP. The GSW-2020P also supports DHCP auto provisioning and TR-069 client function which are suitable for the very large scale deployment from operator or service provider. Both device management features can avoid truck rolls and save OPEX for FTTH service providers.

FMC-1000S-PH is an unmanaged Gigabit Ethernet media converters that support conversion between electrical 10/100/1000Base-T and optical 1000Base-X Ethernet and as PSE (Power Source Equipment) provide PoE+ power over Ethernet. FMC-1000S-PH provides an SFP cage for 100/1000Base-X compatible SFP modules.

The GSW-3208MP is a cost-effect high performance Gigibit L2 PoE+ switch with 8×10/100/1000Mbps TX ports and 2x SFP ports. This switch supports remote management by SNMP, Http/Https or Telnet/SSH, and local management by console interface. Console interface is supported for some basic settings using CLI commands. The GSW-3208MP supports many of L2 switch functions, e.g. 802.1Q VLAN, 802.1x Port Security, Rate Control, Port Configuration, Port Mirroring, Port Statistics, QoS functions, etc. Auto-MDIX function is supported for every TX port of the switch for easy cable connection. The GSW-3208MP is compliant with IEEE802.3af and 802.3at. The 8×10/100/1000Mbps TX ports are selectable to provide up to 15.4 or 30 watts power to connect PoE supported devices.